The black Tangent Theta TT525P 5-25x56 with the Gen 3 XR Fine reticle is for long-range shooters who want a finer aiming point than the standard Gen 3 XR, whether the target is steel at distance, a small varmint or a tight group. It is hand-built in Halifax, Nova Scotia, on a 34 mm one-piece tube, with a first-focal-plane reticle, 0.1 mrad turrets, 30 mrad of internal elevation and a side parallax dial from 50 m to infinity.
Part number 800100-0011 is the black, standard-turret Fine model. It has the same holdover layout as the Gen 3 XR (800100-0006), but its center dot is finer, so it covers less of a small target at 25x. The trade-off is a dot that is a little slower to pick up in fast or low-contrast shooting. Below the horizontal, the tree uses 0.2 mrad subtensions that grow from 0.2 to 0.8 mrad, a dot marks each full mrad, and wind holds reach 5 mrad each side. The same reticle in Coyote Brown is 800100-0511.
Key features
- Gen 3 XR Fine reticle - a more precise center dot than the Gen 3 XR, over the same 0.2 mrad holdover tree.
- First focal plane - holds and range estimates stay correct at every magnification.
- TOOL-LESS RE-ZERO - zero the dials by hand at the range (US Patent 10,591,253).
- Double-turn elevation - 28 mrad on the dial, a second-turn indicator pin and a zero stop.
- Lockable fast-focus diopter - -3 to +2.5 range that stays put once set.
- Illuminated reticle - 11 red LED settings with an off detent between each and a 6-hour auto shut-off.
- Proven toughness - waterproof for 4 hours at 10 m, shock-tested to 1,000 g for 10,000 cycles, -45 to +65 C operating range.
Specifications
| Manufacturer part # | 800100-0011 |
|---|---|
| UPC | 666595531321 |
| Model | TT525P Professional, 5-25x56mm |
| Magnification | 5x-25x |
| Objective lens | 56 mm |
| Main tube diameter | 34 mm |
| Focal plane | First focal plane (FFP) |
| Reticle | Gen 3 XR Fine (mrad), illuminated |
| Adjustment units / click value | 0.1 mrad per click |
| Total internal adjustment | Elevation 30 mrad (103 MOA); windage +/- 10 mrad (+/- 34 MOA) |
| Working adjustment range | Elevation 28 mrad (96 MOA); windage +/- 6 mrad (+/- 20 MOA) |
| Elevation dial | Double turn, 28 mrad, with revolution indicator pin and zero stop |
| Windage dial | Single turn |
| Turrets | Non-translating, TOOL-LESS RE-ZERO (US Patent 10,591,253); standard turrets, AIF option not fitted |
| Adjustment direction | Counter-clockwise up, counter-clockwise right |
| Parallax adjustment | Side dial, 50 m to infinity |
| Field of view @ 5x | 4.3 degrees (7.6 m @ 100 m) |
| Field of view @ 25x | 0.9 degrees (1.6 m @ 100 m) |
| Eye relief | 90 mm (3.54 in) |
| Exit pupil | 11 mm @ 5x; 2.3 mm @ 25x |
| Diopter range | -3 to +2.5, lockable |
| Reticle illumination | Red LED, 11 settings with off detent between each, 6-hour auto shut-off |
| Battery | CR2032 or DL2032 3 V lithium |
| Length | 425 mm (16.7 in) |
| Width / height | 103 mm / 86 mm |
| Weight | 1,150 g (40.6 oz) |
| Objective bell / eyepiece diameter | 65 mm / 45 mm |
| Exterior finish | Type II anodized, matte black |
| Waterproof | 4 hours @ 10 m |
| Shockproof | 1,000 g @ 10,000 cycles |
| Operating temperature | -45 C to +65 C (-49 F to +149 F) |
| Storage temperature | -51 C to +85 C |
| Recommended ring torque | Up to 25 in-lb |
| Country of manufacture | Canada (Halifax, Nova Scotia) |
In the box
- Riflescope with CR2032/DL2032 battery installed
- Tenebraex KillFlash anti-reflection device (ARD)
- Tenebraex Tactical Tough objective and ocular lens covers
- Lens pen
Warranty
Tangent Theta riflescopes carry a lifetime warranty against manufacturer defects. Warranty and non-warranty repairs are handled at the Armament Technology facility in Halifax, Nova Scotia, and a return authorization (RMA) is required before shipping a scope in for service.