A 4x night vision riflescope with a Level 1 white phosphor Gen 3 tube, aimed at hunters who want a black-and-white night image at a lower price than the Advanced Performance version. The Wolverine Pro-4 uses a 70 mm objective and fixed 4x magnification. That gives an 8.3° field of view, wide enough to pick up and follow hogs or coyotes at typical night distances. The body is high-strength aluminum in a non-reflective matte black finish, and the outer lenses have a scratch-resistant coating. Range focus starts at 25 meters, so the scope works around feeders and field edges as well as in open ground.
This is the 3AW1 version. AGM describes 3AW1 as a Gen 3 Level 1, auto-gated tube with white phosphor (P45) and an FOM of 1400-1800, with practically no visible spots in the center zone. The 3APW sibling steps up to an Advanced Performance white phosphor tube rated FOM 2000+, and the 3AL1 sibling uses the same Level 1 grade with green phosphor instead of white.
AGM does not publish a caliber or recoil rating for the Wolverine Pro. Its spec sheet lists MIL-STD-810G testing only, so check with AGM before you mount it on a hard-recoiling magnum.
Key features
- Gen 3 Level 1 tube: auto-gated white phosphor (P45), rated FOM 1400-1800, made in the USA.
- 4x magnification, 70 mm objective: 8.3° field of view, 30 mm eye relief, focus from 25 m to infinity.
- Red chevron reticle with ballistic drop: a projected, illuminated red aiming point with holdover marks below it; brightness is adjustable.
- Full shooter controls: reticle brightness, eyepiece focus, range focus, and windage and elevation adjustments in 1/2 MOA boresight steps.
- Simple power: two standard AA batteries run the scope for about 40 hours of continuous use at 20°C (68°F).
- Rugged build: high-strength aluminum housing, waterproof, and tested to MIL-STD-810G.
- Rail mount included: the scope ships on a rail mount; distributor data lists it as a quick-release (QR) mount.
Specifications
| Manufacturer part # | 15WP4423484111 |
|---|---|
| UPC | 810027774187 |
| Model | Wolverine Pro-4 |
| Image intensifier tube | 3AW1 - Gen 3 Level 1, auto-gated, white phosphor (P45) |
| FOM | 1400-1800 |
| Resolution | 64-72 lp/mm (AGM Gen 3 range) |
| Signal-to-noise ratio | 22-31 (AGM Gen 3 range) |
| Gating | Auto-gated |
| Tube origin | Made in USA (AGM: all Gen 3 tubes it offers are US-made) |
| Magnification | 4x |
| Objective lens | 70 mm |
| Field of view | 8.3° |
| Eye relief | 30 mm |
| Focus range | 25 m to infinity |
| Diopter adjustment | -6 to +2 |
| Reticle | Illuminated red chevron with ballistic drop, adjustable brightness |
| Boresight adjustment | 1/2 MOA |
| Mount | Rail mount included (quick-release per distributor data) |
| Battery | 2 x AA (1.5 V) |
| Battery life | 40 hours at 20°C |
| Dimensions | 215 x 95 x 82 mm (8.4 x 3.7 x 3.2 in) |
| Weight | 1.07 kg (2.35 lb) |
| Environmental | Waterproof; MIL-STD-810G |
| Housing | High-strength aluminum, matte black |
| Caliber / recoil rating | Not published by AGM |
Warranty
AGM Global Vision lists a limited 3-year warranty for the Wolverine Pro series.
Downloads
US sale only. This night vision device is subject to U.S. export controls. We ship it to U.S. addresses only, and it may not be exported or taken outside the United States.
