A compact 4x night vision riflescope with AGM's top-grade white phosphor Gen 3 tube, built for hog, predator and varmint hunters who shoot at practical night distances. The Wolverine Pro-4 pairs a 70 mm objective with a fixed 4x eyepiece, so it keeps a fairly wide 8.3° field of view for following moving animals. The housing is high-strength aluminum with a non-reflective matte black finish, and the external lenses carry a scratch-resistant coating. Range focus reaches down to 25 meters, which makes it a good fit for close timber, brush lines and feeders as well as open fields.
This is the 3APW version, the top tube option for the Pro-4. AGM describes 3APW as a Gen 3 Advanced Performance, auto-gated white phosphor (P45) tube with an FOM of 2000 or higher, made in the USA by L3 or Elbit. The 3AW1 sibling uses a Level 1 white phosphor tube rated FOM 1400-1800, and the 3AL1 sibling uses the same Level 1 grade with green phosphor. Choose this one if you want the highest tube grade AGM offers in this scope.
AGM does not publish a caliber or recoil rating for the Wolverine Pro. Its spec sheet lists MIL-STD-810G testing only, so check with AGM before you mount it on a hard-recoiling magnum.
Key features
- Gen 3 Advanced Performance tube: auto-gated white phosphor (P45), rated FOM 2000+, made in the USA.
- 4x magnification, 70 mm objective: 8.3° field of view, 30 mm eye relief, focus from 25 m to infinity.
- Red chevron reticle with ballistic drop: a projected, illuminated red aiming point with holdover marks below it; brightness is adjustable.
- Full shooter controls: reticle brightness, eyepiece focus, range focus, and windage and elevation adjustments in 1/2 MOA boresight steps.
- Simple power: two standard AA batteries run the scope for about 40 hours of continuous use at 20°C (68°F).
- Rugged build: high-strength aluminum housing, waterproof, and tested to MIL-STD-810G.
- Rail mount included: the scope ships on a rail mount; distributor data lists it as a quick-release (QR) mount.
Specifications
| Manufacturer part # | 15WP4423474111 |
|---|---|
| UPC | 810027779748 |
| Model | Wolverine Pro-4 |
| Image intensifier tube | 3APW - Gen 3 Advanced Performance, auto-gated, white phosphor (P45) |
| FOM | 2000+ |
| Resolution | 64-72 lp/mm (AGM Gen 3 range) |
| Signal-to-noise ratio | 22-31 (AGM Gen 3 range) |
| Gating | Auto-gated |
| Tube origin | Made in USA; AGM lists its Advanced Performance Gen 3 tubes as made by L3 and Elbit |
| Magnification | 4x |
| Objective lens | 70 mm |
| Field of view | 8.3° |
| Eye relief | 30 mm |
| Focus range | 25 m to infinity |
| Diopter adjustment | -6 to +2 |
| Reticle | Illuminated red chevron with ballistic drop, adjustable brightness |
| Boresight adjustment | 1/2 MOA |
| Mount | Rail mount included (quick-release per distributor data) |
| Battery | 2 x AA (1.5 V) |
| Battery life | 40 hours at 20°C |
| Dimensions | 215 x 95 x 82 mm (8.4 x 3.7 x 3.2 in) |
| Weight | 1.07 kg (2.35 lb) |
| Environmental | Waterproof; MIL-STD-810G |
| Housing | High-strength aluminum, matte black |
| Caliber / recoil rating | Not published by AGM |
Warranty
AGM Global Vision lists a limited 3-year warranty for the Wolverine Pro series.
Downloads
US sale only. This night vision device is subject to U.S. export controls. We ship it to U.S. addresses only, and it may not be exported or taken outside the United States.
