The Trijicon IR-PATROL IRMO-100 is a compact 640x480 handheld thermal monocular for patrol officers, landowners and hunters who need to find and identify heat signatures after dark. A 12-micron vanadium oxide sensor and a 19mm f/1.2 lens give a wide 22° field of view at 1x for scanning, with 8x digital zoom for a closer look at what you find. The 16 oz machined aluminum body runs on a single CR123 battery and is built and tested in the USA to MIL-STD-810G.
This is the standard IRMO-100 viewer without the download kit. It shares its sensor, optics and housing with the IRMO-100C; the IRMO-100C adds Trijicon's download card and cable for image capture and analog video output. If you only need to see and identify targets in the field, the IRMO-100 is the simpler choice.
Key features
- 640x480, 12 µm VOx sensor with under 50 mK thermal sensitivity
- Wide 22° field of view at 1x, plus 8x digital zoom
- Thumbstick controller that is weatherproof and simple to use by feel in total darkness
- Polarity control with three white hot and three black hot levels
- Manual focus knob for a sharp picture near and far
- Tripod interface for steady observation from a fixed position
- Rugged 6061 aluminum housing, tested to MIL-STD-810G and made in the USA
Specifications
| Manufacturer part # | IRMO-100 |
|---|---|
| UPC | 719307800724 |
| Model | IR-PATROL IRMO-100 |
| Sensor | 640x480 uncooled VOx, 12 µm pixel pitch |
| Frame rate | 30 Hz |
| Thermal sensitivity | < 50 mK |
| Spectral response | 8-12 µm |
| Display | Digital OLED |
| Magnification | 1x base, 8x digital zoom |
| Objective lens | 19mm f/1.2, manual focus |
| Field of view | 22° |
| Eye relief | 1.06 in (26.92mm) |
| Diopter | -6 / +2 |
| Power | 1 x CR123 lithium |
| Battery life | Approx. 2 hours per battery |
| Operating temperature | -40°F to +131°F (-40°C to +55°C) |
| Dimensions (L x W x H) | 5.95 x 2.0 x 2.95 in |
| Weight | 16 oz (454 g) |
| Mount | Tripod (1/4-20) interface, no mount included |
| Finish | Matte black |
| Durability | Designed and tested to MIL-STD-810G; made in USA |
Downloads
US sale only. This thermal imaging device is subject to U.S. export controls. We ship it to U.S. addresses only, and it may not be exported or taken outside the United States.