null Skip to main content

SIG SAUER ROMEO2 1x30mm Reflex Sight with Large Shroud - 3 MOA Red Dot, PRO Footprint (SOR21301)

SIG SAUER ELECTRO-OPTICS

$599.99
(No reviews yet) Write a Review
SKU:
U-798681701353
UPC:
798681701353
Weight:
0.35 LBS
Sight Type:
Enclosed reflex sight, 1x30mm
Reticle:
3 MOA red dot
Footprint:
SIG PRO RX
Shroud:
Full-length steel, sealed rear window
Battery:
CR2032, side tray
Run Time:
25,000 hr at medium
Illumination:
12 day / 3 NV
Activation:
MOTAC, MAGNETAC
Waterproof:
IPX7
Weight:
2.50 oz with shroud
Color:
Black
Adding to cart… The item has been added

The SIG SAUER ROMEO2 with Large Shroud is a 1x30 pistol reflex sight that ships fully enclosed for duty and carry guns used in rough conditions. A 7075 aluminum housing sits under a full-length steel shroud with a sealed rear window, so mud, rain and lint stay off the emitter. SIG designs, tests and assembles it in the USA.

This is part SOR21301, the 3 MOA red dot version of the Large Shroud model. Unlike the ROMEO2 Full Kit (SOR21300), which ships with two shrouds so it can also run as an open emitter, the Large Shroud model comes set up only as an enclosed sight. Its twin, SOR21601, carries a 6 MOA dot. SIG notes it will not fit every DeltaPoint PRO-footprint slide on the market because recoil boss dimensions vary.

Key features

  • Enclosed from the box - full-length Melonite-treated steel shroud and sealed polycarbonate rear window protect the emitter from dust, debris and moisture.
  • 3 MOA red dot - a finer aiming point for precise shots; 15 brightness settings, 3 of them for Gen 3+ night vision with D.A.R.C.
  • Side battery tray - push-button tray takes a CR2032 without removing the optic; 25,000 hours at medium brightness.
  • MOTAC and MAGNETAC - wakes on motion, sleeps after 2 minutes still, and turns off in a compatible magnet-equipped holster.
  • Molded aspheric glass lens - red notch reflector coating for brightness and light transmission with low distortion.
  • TruHold zeroing - lockless 1 MOA adjustments with twin springs built to hold zero under handgun recoil.
  • PRO RX footprint - mounts directly to SIG pistols with the PRO slide cut.

Specifications

Manufacturer part #SOR21301
UPC798681701353
ModelROMEO2 1x30mm with Large Shroud
Magnification1x
Objective lens30 mm
Reticle3 MOA red dot
Illumination settings15: 12 daylight / 3 night vision
ConfigurationEnclosed: full-length steel shroud with sealed polycarbonate rear window
Adjustment1 MOA per click; TruHold lockless zeroing
Total elevation / windage travel100 MOA / 100 MOA
Battery(1) CR2032, side battery tray with push-button release
Run time25,000 hours at medium setting
ActivationMOTAC motion activation (shuts off after 2 minutes without motion); MAGNETAC holster activation
Night visionD.A.R.C. settings for Gen 3+ night vision devices
WaterproofingIPX7 (submersion to 1 meter)
Housing7075 aluminum; Melonite-treated steel shroud
FootprintSIG PRO RX footprint
Length x width1.84 x 1.32 in (46.74 x 33.53 mm)
Height1.12 in (28.45 mm) without shroud; 1.25 in with shroud
Weight (with battery)2.50 oz with full shroud and rear window
ColorBlack
AssemblyDesigned, developed, tested and assembled in the USA

In the box

  • ROMEO2 1x30mm reflex sight
  • CR2032 battery
  • M4 x 0.7 Torx-head mounting screws
  • Steel full-length shroud with sealed polycarbonate rear lens
  • T6 Torx shroud screws and shroud washers
  • Loaded chamber indicator (LCI) deflector
  • T6 and T10 wrenches
  • Liquid threadlocker
  • Operator's manual

Warranty

SIG lists the ROMEO2 under the SIG SAUER Infinite Guarantee: no receipt, no warranty card, fully transferable. Exclusions such as misuse, intentional damage, loss and unauthorized modification apply; see SIG's current terms, and contact SIG SAUER Customer Service for a return authorization before sending a product in.

Downloads