The BRAVO6T-BDX 3-18x44mm with the MRAD Milling 2.0 reticle is a lighter smart riflescope for shooters who dial their elevation and want the scope to tell them where the round will land. Zero the rifle, build a load profile in the SIG BDX app and send it to the scope. From then on, every click of the eTRAK elevation dial updates the impact distance shown at the top of the sight picture. That solution comes from Applied Ballistics and uses live pressure, temperature and humidity from sensors inside the scope, so it follows the weather through the day. Add a KILO BDX rangefinder and the scope switches to range-based solutions on its own.
SOBBDX63102 is the 3-18x44mm model with the uncluttered MRAD Milling 2.0 crosshair, a good fit for hunting and for shooters who prefer a clean center with mil references for wind and ranging. The SOBBDX63104 version has the same scope with the DEV-L 2.0 holdover tree. Compared with the 5-30x56mm models, this scope is about 10 oz lighter, has a wider 34.9 ft field of view at 3x, and gives 50 MRAD of elevation instead of 30.
Key features
- Dial-to-distance workflow - turn the eTRAK dial until the displayed distance matches the target. You don't need a dope card or range card.
- Turrets with real travel - 0.1 MRAD clicks, 10 MRAD per revolution, 50 MRAD of elevation and 26 MRAD of windage. The locking elevation dial has a multi-lock zero stop.
- Display inside the scope - a low-profile readout at the top of the view shows dial position, impact distance, wind input and the wind hold, plus a LevelPlex cant warning.
- Eyepiece wind buttons - left and right buttons add or subtract wind speed in 1 mph steps, and the wind hold also accounts for spin drift.
- Connected - BDX 2.0 Bluetooth up to 30 yards to KILO BDX rangefinders and the SIG BDX app. Firmware updates are installed through the app.
- Clear, tough optic - HDX glass with ED elements, side-focus parallax, red reticle illumination and IPX-7 waterproofing.
- Ready to mount - it ships installed in a 35mm ALPHA5 mount with a 1913 diving-board top for a rangefinder.
Specifications
| Manufacturer part # | SOBBDX63102 |
|---|---|
| UPC | 798681721450 |
| Model | BRAVO6T-BDX 3-18x44mm |
| Magnification | 3-18x |
| Objective lens | 44 mm |
| Main tube | 35 mm |
| Focal plane | First (FFP) |
| Reticle | MRAD Milling 2.0, illuminated |
| Click value | 0.1 MRAD |
| Travel per rotation | 10 MRAD |
| Total elevation travel | 50 MRAD |
| Total windage travel | 26 MRAD |
| Zero stop | Multi-lock: locks at zero, 10 clicks below and 250 clicks above zero |
| Parallax | Side focus adjustment (SIG does not publish a range) |
| Field of view | 34.9 - 5.8 ft @ 100 yd |
| Eye relief | 3.7 - 3.9 in |
| Exit pupil | 8.2 - 2.4 mm |
| Weight | 22.7 oz |
| Illumination | Red reticle illumination; position 0 runs the display with the reticle unlit |
| Battery | 2 x 1/3N (3V) |
| Ballistics | Applied Ballistics solver, ZeroSync, eTRAK smart elevation dial |
| Display | In-view heads-up display with LevelPlex cant indicator; 6 brightness levels |
| Sensors | Pressure, temperature, humidity |
| Connectivity | Bluetooth (BDX 2.0), up to 30 yd, to KILO BDX rangefinders and the SIG BDX app |
| Waterproof | IPX-7 (immersion to 1 m), fog proof |
| Mount | ALPHA5 35mm, 1.250 in. (included, factory installed) with LRF diving board |
| Color | Black |
| Assembly | Assembled in Oregon, USA |
In the box
- BRAVO6T-BDX riflescope, factory installed in the ALPHA5 35mm mount
- 1913 LRF diving-board ring top
- Tools
- Operator's manual
Warranty
SIG SAUER Infinite Guarantee: fully transferable, no warranty card or receipt required, no time limit, no charge. It excludes intentional damage, misuse, cosmetic damage that does not affect performance, loss, theft and unauthorized repair or modification. SIG's warranty applies to US commercial customers.
