The Burris XTR Pro 5.5-30x56 with the Horus TREMOR5 reticle is for match shooters who would rather hold for elevation and wind than dial between every target. It is the same Greeley, Colorado-built XTR Pro competition scope: 34mm tube, first focal plane, 1/10 MIL clicks, 26 MIL of elevation and parallax focus from 20 yards to infinity. Because the reticle is in the first focal plane, every hold on the grid stays true at any magnification from 5.5x to 30x.
This is item 202224, the current black XTR Pro with the illuminated Horus TREMOR5. TREMOR5 keeps the 0.2 milliradian Horus grid, time-of-flight wind dots and TREMOR milling chevrons of the TREMOR3, but drops the Rapid Range bars and moving-target holds for a clearer picture, which suits multi-target PRS stages. The SCR 2 MIL (202222) and SCR 2 1/4 MIL (202223) versions use the same scope with Burris tree reticles instead.
Key features
- Horus TREMOR5 grid: 0.2 MIL hold grid with wind dots and milling chevrons for quick follow-ups and engaging several targets without touching the turrets.
- Tool-less Zero Click Stop elevation: reset zero by opening the cam lever on the knob, no tools required. 12 MIL per turn, 26 MIL total.
- QD Race Dial plus standard dial: write ranges on the Race Dial's whiteboard surface, or snap on the plain black MIL dial with the two release buttons.
- Two illumination colors: red and green with 11 brightness levels each, off positions between levels and a 3-hour auto shut-off (CR2032).
- Zero Click Stop windage: returns to your sight-in setting, with 15 MIL of total windage and a cap included.
- Side focus to 20 yards: parallax adjustment from 20 yards to infinity for close stages and long-range targets alike.
Specifications
| Manufacturer part # | 202224 |
|---|---|
| UPC | 000381022240 |
| Reticle | Horus TREMOR5, illuminated |
| Focal plane | First focal plane (FFP) |
| Color | Black |
| Magnification | 5.5-30x |
| Objective | 56 mm (63.5 mm bell) |
| Main tube | 34 mm |
| Field of view @ 100 yd | 23 - 4.2 ft |
| Eye relief | 3.2 - 4 in. |
| Exit pupil | 8.6 - 1.8 mm |
| Click value | 1/10 MIL |
| Elevation travel | 26 MIL total, 12 MIL per revolution |
| Windage travel | 15 MIL total |
| Zero stop | Tool-less Zero Click Stop elevation; Zero Click Stop windage |
| Parallax | Side focus, 20 yds to infinity |
| Illumination | Red and green, 11 levels each, 3-hour auto shut-off |
| Battery | CR2032 |
| Length | 15.16 in. |
| Weight | 35.3 oz |
| Waterproof / fog-proof | Yes |
In the box
- XTR Pro 5.5-30x56mm riflescope
- Quick Detach Race Dial and standard QD MIL elevation dial
- Windage knob cap
- Flip-up scope caps
- Hex wrench
Warranty
Covered by the Burris Signature Warranty, the new name for the Burris Forever Warranty (Burris says the coverage is unchanged). Burris will repair or replace the riflescope if it is damaged or defective for the life of the product. Coverage transfers to later owners, and no warranty card or receipt is needed. Loss, theft and deliberate damage are excluded.